3Dプリンタのハードウェアを改造・変更したら、それに伴ってプリンターの制御も変更した方がいいのでは...? そもそもメーカーの設定は自分の好みの設定なのか...? FDMな3Dプリンターの制御ボードに書き込まれている設定値を見てみよう。 ソフトウェア ...

Without slicing software, 3D printing is not possible. The slicer is the essential intermediate step between designing the model and printing it. It translates the 3D model into successive layers and ...

It works with host software such as repetier host and OctoPrint, cura, Simplify3D, etc... giving you full control of your hardware. It works stand alone (not connected to PC) if you use a WIFI SD Card ...

This PKGBUILD uses cpanm to install Slic3r dependencies, this deps are not shared on the system (only for the package). This provides a quick and dirty way to try Repetier Host : a single package to ...

In order to design and print a 3D model, it must pass through a variety of software... First you need a software for designing. This produces, for example, a *.STL file. This must be cut into small ...